Plywoodboard has an advanced production process, which is pressed under high pressure and heat, so it is very good quality and ensures safe use.
... Plywood is made by gluing thin sheets of wood veneer together. The thickness of an individual sheet is 1.2mm – 2.2mm – 3mm. The plates are constructed so that the grain directions of the overlapping plates are normally perpendicular to each other. In SOMMA-made rubberwood, eucalyptus, acacia, and birch plywood boards, there are usually an odd number (at least three), so the grain orientation of the surface panels is always the same. In conifer plywood sheets (also called conifers, conifers), the number can also be even. In the adhesive, phenolic resin glue, E0, E1, E2, MR, UF glue are weather resistant. In terms of color, it is significantly darker than wood veneer.

Okoume, pronounced oh-kuh-mey, Okoume plywood is made from the wood of the Okoume tree. It is sometimes called Okoume Mahogany and is pinkish-brown or light red in color. ... Okoume has a uniform texture and straight to almost no rippling grain that looks intertwined and appealing. Okoume plywood is commonly used to build racing boats and other uses where light wood is required. It can also be used to build furniture or on kitchen cabinets because of its sleek look.
Okoume wood is usually a high quality product with 1m2 x 2m4 double-sided panels with a thickness of 6mm – 80mm. It is very soft and plywood made from Okoume is usually not pressure treated. The core can be made from pine, poplar or hardwood for added strength. One block of Okoume board is about 650kg/block.

Acacia wood slats is a wood that is assembled from many small natural glue sticks into boards. Because of its low cost, lightness and low termites, acacia wood slats are often used to produce furniture, decorative joinery, etc.
... Acacia wood, also known as Melaleuca wood, is a genus of several species of shrubs and trees. It is known that this wood originated in the ancient continent of Gondwana.
The characteristic of acacia is a straight tree, the wood is yellow-white and has veins. At the same time, there is a distinct core cupping.
Acacia wood is a type of wood that is attached from natural candy wood bars. After that, it is pressed with suitable pressure and temperature. To ensure durability and anti-termite when put into use.
Product specifications of acacia wood planks:
Thickness: 12 cups, 15 cups, 18 cups;
Dimensions: 1220 x 2440 mm;
Humidity: from 8 – 12% (maximum);
International standard glue: F4
Currently, acacia acacia wood is produced with the following popular sizes: 12mm, 15mm, 18mm, 20mm, 22mm, 25mm,,….
Components of the glue board
As well as other lines of laminated wood. The main component of the glue board is a small sized natural glue stick. After that, the wooden slats will be joined together by modern machines. From there, the finished product with the required size (see details of the production process below).
In addition to the main ingredient is acacia wood, the following materials must also be mentioned:
Adhesive Urea Formaldehyde (UF);
Phenol Formaldehyde (PF);
Polyvinyl Acetate (PVAC).
CLASSIFICATION OF WOODEN WOOD PLANTS

Acacia wood is a natural wood with very good economic and commercial value, if in the past, acacia wood was only known as the main raw material of the paper industry, today acacia wood is also widely used in the furniture industry. .
... In addition, acacia wood pallets are now gradually replacing pine wood pallets, thanks to their outstanding advantages and better prices. Acacia is a straight tree, belonging to group III, yellow-white with veins, with distinct core, wood with multi-faceted effects. So hybrid acacia wood is very suitable for commercial forestry projects.
hybrid acacia wood has extremely good growth ability, providing high and stable quality. Acacia hybrid can tolerate pests well, adapt to dry weather. In Vietnam, Acacia is grown a lot in Binh Phuoc and Southern provinces.
Being mass-grown, it is a relatively stable source of materials and quality, low warping compared to other types of trash, mechanical strength, toughness, and adaptability to harsh weather. Large, round Acacia wood is the raw material used to produce furniture for export. Acacia trees with a diameter of 17-18 cm or more have a much higher price than the price of raw materials used to produce paper. In addition, hybrid acacia is also used to make plywood, high-grade plywood, sawn timber used in construction...

Acacia Laminate Flooring - is produced from the wood of the Acacia tree, also known as Melaleuca Bong Vang.
... With the advantage of low price, beautiful colors, diverse and rich designs plus abundant raw materials, Acacia wood is currently being used a lot in the design of modern super lv men's crossbody bags. . A special thing about the Gucci Acacia acacia crossbody bag is that it is completely resistant to termites because the wood has a bitter substance unlike some wood products on the market. The characteristics of this type of natural wood flooring are as follows:
- Natural Acacia wood flooring is produced mainly from acacia trees. It is a very popular plant that is being grown today. These plants can be grown anywhere because they are highly adaptable. Acacia trees are divided into two main types: Acacia acacia and coniferous acacia. It takes ten years for the tree to mature and harvest. At this time, the diameter of the tree ranges from 17 to 20 cm.
- Keo Tram natural wood flooring is known to be resistant to termites and insects. At the same t
> - In the acacia tree, there are tannins and substances in the acacia tree that help the wood floor to be resistant to fungi that damage the wood.
- Melaleuca wood is very suitable for processing furniture and flooring.
- Because acacia acacia is not a precious wood, the price of acacia acacia wood flooring is much cheaper than many other types of natural flooring such as spokes, bamboo floors, oak, walnut, red oak, cedarwood, and chiu Liu. usage time is not inferior.
- Acacia acacia wood flooring is covered with UV paint on automatic transmission lines, dried by the light of UV lamps, so the surface is highly scratch resistant and does not contain toxins, protecting your family's health. .
- Thick, solid yin-yang lock design makes construction and installation easy and fast without nails.

Eucalyptus Hardwood Plywood FSC is manufactured from plantation hardwood. The product is 100% rotary cut eucalyptus panel with phenolic glue throughout. The product has a glue line of Exterior E1 and can be typically used in furniture, linings, soffits and cladding...
... Almost all eucalyptus veneer core plywood are processed under two times hot press.
Since the eucalyptus veneer is rougher than the poplar veneer, a eucalyptus veneer core plywood is usually laminated with a poplar surface before laminating decorative surfaces on top and back.
A good two times hot press eucalyptus core with WBP glue can be sold as marine grade.
Density: approximately 580-600 kgs/m3.
Eucalypt(Eucalyptus) Plywood/Film Faced Plywood are of high quality. They are about 20% more expensive than poplar plywood/film faced plywood.

Pine is the most common type of wood used to manufacture plywood products of all kinds. Softwood plywood used in the construction industry is mainly made from several types of pine..
... Pine plywood is impact resistant, very strong and moderate in weight. Therefore, pine plywood is very suitable for making indoor floors.
The price of plywood from pine wood is cheaper than other types of plywood from other wood such as oak.. Especially, pine is easy to exploit and pine tree is also an easy tree to grow, waiting time to harvest. short. That is why a lot of pine forests in Vietnam are planted for logging.
Rubber Plywood is essentially the wood that comes from the rubber tree, the Pará rubber tree to be specific. The Pará rubber tree is scientifically known as Hevea brasiliensis. As the wood of a rubber tree, one would expect it to be soft and springy like, well, rubber. However, rubber wood is essentially a hardwood. Plywood, on the other hand, is a type of manufactured wood panel. It is made by gluing together plywood layers, also called veneers. Softwood plywood is a type of plywood created from various types of softwood.

Product Technical Information:
... - Produced from natural planted forest wood
- Impregnated with pressure drying and termite treatment
- Humidity from 8 -15%
- Using imported specialized glue
- Dimensions: 1,200 x 2,400mm; 1,220 x 2,440mm
- Common thickness: 10mm, 12mm, 15mm, 18mm
- AA quality: 2 sides are equally beautiful, no blemishes.
- AB quality: 1 side is as good as grade A, the other side is worse, with blemishes.
- BC quality: 2 equally bad sides, with blemishes, dead eyes. This type of board is used for flooring, wall cladding, industrial wood door bones.

LVL (Leneer Veneer Lumber) plywood is manufactured on the basis of industrial wood, many layers of veneer laminated in one direction (parallel), with the adhesion of plywood glues...
... LVL plywood is used a lot in the system of making frames, beams of housing structures, in construction, high-rise building projects. Used in the production of wooden furniture: Materials for creating soups for tables, chairs, cabinets...
LVL plywood offers a number of advantages over conventional lumber (natural lumber): Manufactured in a SOMMA factory controlled to specifications, LVL texture is stronger, stiffer and uniform higher thing. LVL is a structural composite, comparable to laminated plywood but with a higher allowable stress.
Specifications: Plywood special hydraulic press 1600 tons.
Size: According to order requirements
Thickness tolerance: – 0.05 / 0.05 mm
Pressed materials: Mixed wood, planted forest
Uses: Making Furniture, Doors, Enclosures, Columns, Swings, Trusses, Floors, Containers, Ships, Boats, .. Origin of plywood: Vietnam. Plywood: Hard junk wood. Finished horizontal/vertical grafted surface, 1 side sanded finish. Allowable thickness production error is + /- (Plus minus) 0.5mm. Faceted wood: Red oil, maple, Beech, Oak, Ash,.. Unit: CMB/Plate Board moisture: 15-20% Glue: Phenol, E0, E1,E2 Place of production: Vietnam Face types: AA – AB – BB – BC

Wood pellets (Sawdust pellets) are the product of the process of compressing wood sawdust under high pressure, through the heating process as a glue in the sawdust to bind together, creating sawdust pellets...
... Features and Applications
Sawdust pellets are widely used as fuels in industries due to their low cost, high combustion efficiency, very low carbon content when burned compared to other materials, and environmental friendliness. environment, has the ability to maintain combustion longer than other conventional combustion materials.
Sawdust pellets are small in size, easy to transport and store.
The ash after burning sawdust pellets can be used as a clean fertilizer.
In addition, sawdust pellets are also widely used in daily life to replace charcoal, honeycomb charcoal, ... or used to line the barn in livestock, used for restaurant kitchen systems, sauna, massage, hot and cold swimming pool…

Unpaired acacia wood flooring is assembled from smaller loose wooden slats. The slats are sawn, planed, milled, bonded with serrated tenons and bonded with high quality glue. After that, the plywood is treated before being put into production to increase the stability, durability, and minimize the deformation of the wood before the climatic conditions in Vietnam...
... Unpaired acacia wood flooring has the cheapest price on the market today and has good quality because it is assembled from smaller pieces, so it has a higher selectivity. Small pieces will be carefully processed and tested before being assembled into large bars, so the rate of dead eyes and bad bars is very low. The inherent disadvantage of engineered wood is that the uniformity of color and grain is not high, because it is assembled from different small wooden slats.
Advantages of laminate flooring Glue stick:
- Materials are mainly taken from planted forests, so it can solve the problem of scarcity of natural wood. The cost is therefore also lower than other types of wood.
- No termites, warping
- The surface is well treated, so it has high color fastness, good scratch and impact resistance.
- Durability is not inferior to solid wood.

Peeled boards are layers of wood that are sliced (peeled) from natural wood. The size of these layers of wood varies depending on the purpose of use and the size of the natural wood in each place. After being cut (peeled), they are dried, dried and stored, ready for production..
... Structure of Peeled Board:
Peeled Board are layers of wood that are thinly sliced from natural wood trees. The thickness of each sheet ranges from 0.3 to 0.6 mm. The width depends on the type of wood about 170mm to 250mm, which is dried and dried. Usually, veneers are divided into 2 types: peeled and round. And depending on the type of cutter and because it is sliced from natural wood, the surface of the peeled wood has the veins of natural wood.
Types Peeled Board:
On the market today, there are many different types of Peeled Board depending on the material of each type of wood that makes them, but each type will have its own characteristics of that tree such as: eucalyptus peeled wood, plank wood. peeled rubber, peeled oak wood, peeled acacia wood, peeled melaleuca....
Advantages of using plywood for furniture:
- With the current situation of natural wood being increasingly depleted and becoming expensive, industrial furniture is becoming popular and is an effective substitute for natural wood but still ensures quality and Beauty properties.
– Low cost: A natural wood can be sliced ​​into many veneers and produce many utensils such as tables, chairs, and wardrobes.
– This type of board is all dried and through the manufacturing process to ensure a bright surface, good resistance to warping and termites.
- There are many types of shapes to choose from. The veneer can be decorated with horizontal, diagonal, vertical, etc., running submerged or floating, but still maintaining a modern and luxurious look.